Digi TransPort - Page 319

Configure Advanced interfaces settings
Digi TransPort User Guide 319
ppp n l_md5 0-2
0=Disabled
1=Enabled
2=Preferred
Allow this unit to authenticate using
CHAP-MD5
ppp n r_md5 0,1
0=Off
1=On
Allow remote unit to authenticate
using CHAP-MD5
ppp n l_ms1 0,1
0=Disabled
1=Enabled
2=Preferred
Allow this unit to authenticate using
MS-CHAP
ppp n r_ms1 0,1
0=On
1=Off
Allow remote unit to authenticate
using MS-CHAP
ppp n l_ms2 0-2
0=Disabled
1=Enabled
2=Preferred
Allow this unit to authenticate using
MS-CHAPv2
ppp n r_ms2 0,1
0=Off
1=On
Allow remote unit to authenticate
using MS-CHAPv2
ppp n lcn 0-4096 LCN
ppp n lcnup 1=up,
0=down
LCN direction
ppp n defpak 16,32,64,128,25
6,512 or 1024
Default X.25 packet size
ppp n cingnua text (valid
NUA)
Use NUA
ppp n ipmode 0=XOT, 1=raw
TCP
Use TPAD over interface
ppp n baklcn 1-4095 (Backup) LCN
ppp n baklcnup 1=up, 0=down (Backup) LCN direction
ppp n bakl2iface lapb, lapd, tcp,
ssl, vxn
Use backup interface
ppp n bakl2nb 0-255 Use backup interface
ppp n bakcingnua
ppp n baknum
Entity Instance Parameter Values Equivalent Web Parameter