Digi TransPort - Page 540

Configure X.25 parameters
Digi TransPort User Guide 540
pad n padmode 0=Normal, 1=Prompt
Always On
PAD mode
pad n profile 1-4, 50, 51,90,91 Use PAD Profile
pad n strip_tspaces 1=enabled, 0=disabled Strip Trailing Spaces
pad n llmode 1=enabled, 0=disabled Enable Leased Line Mode
pad n enqcon 1=enabled, 0=disabled Send ENQ on Connect
pad n stxmode 1=enabled, 0=disabled Enable STX / ETX Filtering
pad n delconmsg 0-10 Delay connect message n x 10
milliseconds
pad n data_del 0-2147483647 Delay data transfer after
connection by n x 10
milliseconds
pad n inacttim 0-1000 Terminate the PAD call after x
seconds if there has been no
data transmission
pad n nocalltim 0-60000 Disconnect the layer 2 call if
there is no layer 3 call in
progress for x seconds
pad n trig_str text Create an event when the
following data is on the PAD
pad n inactevent 0-2147483647 Create an event when there
has been no activity on the
PAD for x seconds
Entity Instance Parameter Values Equivalent Web Parameter