Event Logcodes parameters
Digi TransPort User Guide 603
Reason Priority
This parameter is for information only.
Attachment List ID
A fixed list of values that can be used to conveniently refer to the associated list of files to
attach to an email.
Files
Allows entering a comma-separated list of names for the files that should be attached to an
email.
Configuring Events
This page controls the configuration of the event that is displayed in bold font at the top of the
page, just below the blue title bar.
Do not log this event
When checked, this checkbox disables logging of the event.
Note This parameter is not saved in the logcodes.txt file but in the config.dan file. This means
that after changing this parameter, you must save the changes by clicking the save
changes link when prompted (this appears after clicking the Apply button). If you click the
Save All Event Code Changes, your changes are not reflected.
Log Priority
The priority of the event to determine whether the event will trigger emails, SMS messages or
SNMP traps. 0=disabled, 1=highest priority, 9=lowest priority.
Alarm Priority
If the above Inherit alarm priority from event checkbox is not checked, this parameter
selects the priority of the reason. Valid values are 0 to 9.
To Next Page
Loading...
