View network interface status
Digi TransPort User Guide 711
Access Point Connections Table
This Access Point Connections table gives information on the Wi-Fi Access Points that the router
is connected to.
Access Point
The name and MAC address of the Wi-Fi Access Point that the router is connected to.
Wi-Fi Node
The Wi-Fi node that has been used to connect to the Access Point.
RSSI
The signal strength experienced by the router when connected to the Wi-Fi Access Point.
Flags
The state information for the Wi-Fi Access Point connection.
Power Save
The current power saving state of the router. The possible values are Awake and Sleep.
Neg. Rates (Mbps)
The transmission rates that have been negotiated with the Wi-Fi Access Point.
Capability Info
The capabilities of the Access Point that the router is connected to.
Related CLI commands
Command Options Parameter Equivalent Web Parameter
wificonn n/a Displays the Wi-Fi connection table.
wificonn x cscan Performs wifi network scan
wifistat n/a Displays the Wi-Fi statistics.
To Next Page
Loading...
