Need help?Do you have a question about the DigiCare LifeWindow Lite LW8 and is the answer not in the manual?
General| SpO2 | Yes |
|---|---|
| Pulse Rate | Yes |
| Model | LW8 |
| Brand | DigiCare |
| Measurement Parameters | SpO2, Pulse Rate |
| Accuracy (SpO2) | ±2% (70%-100%) |
| Operating Temperature | 5°C to 40°C |
| Operating Humidity | 15% to 90% (non-condensing) |
| Storage Humidity | 10% to 95% (non-condensing) |
Provides information on the correct use of the LifeWindow™™ Lite LW8 multi-parameter patient monitor.
Outlines manufacturer's responsibilities and warranty terms for the equipment.
Provides general safety guidelines and indications for the LifeWindow™™ LW8 Lite series device.
Instructions on how to carefully remove the monitor and accessories from the shipping carton.
Describes the front panel of the LifeWindow™™ Lite LW8 monitor and its components.
Details the patient connection panel and the purpose of each connector on the LifeWindow™™ Lite LW8.
Describes the rear panel of the LifeWindow™™ Lite LW8 monitor and its various connectors and switches.
Step-by-step instructions for powering on the LifeWindow™™ Lite LW8 monitor.
Explains how to manage and adjust alarm and pulse sound settings on the monitor.
Details the process of admitting and managing patient data on the LifeWindow™™ Lite LW8.
Instructions for setting date, time, and selecting patient type (Adult/Neonatal).
Information on the monitoring screen layout and configuring physiological waveforms.
Covers ECG patient connections, scale, filters, sweep speed, and alarm messages.
Details SpO2 patient connections, monitoring operations, alarm limits, and messages.
Information on CO2 sensor setup, connections, calibration, and alarm management.
Guides on NIBP cuff selection, placement, operation modes, and alarm messages.
Details temperature probe connections, setup, and alarm messages.
Covers IBP transducer, connection, zero calibration, and alarm messages.
Information on FIO2 sensor setup, calibration, monitoring, and alarm management.
How to connect to printers and generate various reports from the monitor.
Details on connecting to networks and sharing files/folders on the system.
Provides technical specifications for key monitoring parameters.
Technical specifications for CO2, Invasive Pressure, FIO2, and the monitor's display.
Details operating/storage conditions and trend display options.
Instructions for cleaning and maintaining the monitor, probes, and patient cables.
Guidelines for maintaining the monitor's internal battery for optimal life and operation.
To Next Page