Pro Tools Reference Guide108
Satellite
When enabled, the Satellite option sets the local
system to be a satellite system on the network.
When a system is in Satellite mode, it becomes
available to be declared as a satellite from any
administrator system on the network.
Administrator
When the local system is in Administrator
mode, the Administrator settings let you declare
satellites from that system.
System 1–5
These popup menus let you declare up to 4 sat-
ellite systems (in addition to the administrator
system itself) from an administrator system. The
number of the system indicates the order of the
declared satellites in the Transport window.
Advanced Network Settings
The Advanced Network settings let you specify an
IP address and port for Satellite Link communi-
cation.
Interface
For systems that have more than one Ethernet
network connection, the Interface setting lets
you select which connection to use for Satellite
Link communication.
TCP/UDP Port
For systems that have more than one Ethernet
network connection, you can enter the
TCP/UDP port number to be used for Satellite
Link communication.
To Next Page
Loading...