Fig.6
If pressing the key again, to save the changed value(show as Fig.7).
Fig.7
After about 2 seconds, display resume the Fig.1
12.--Power switch control -- before POWER ON, press the Key 6 ,then the system reset.
PR:1 M1:2x2 Way
SAVE CHANGE ?
PR:1 M1:2x2 Way
SAVE OK
11.STORE-- parameter store setting. Firstly pressing the key, display will prompt you whether to
save change. (Show as Fig.6)
Notice: All of channels are mute when you have finished adjusting proceeding or mode every
time. Press the button OUT GAIN, can resume one-off to all of channels output; press the
button again, resume volume adjustment and mute key function.
Fig.5b
PR:1 M1:2X2W+2S
CH:1 GN:MUTE ON
5
To Next Page
Loading...