Need help?Do you have a question about the Digital Monitoring Products XR150 and is the answer not in the manual?
General| Alarm Current | 1.5 A |
|---|---|
| User Codes | Up to 99 |
| Input Voltage | 16.5 VAC |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Contact Rating | 2A @ 30VDC |
| Keypad | Up to 8 keypads |
Recommendation to test the burglary portion of the system weekly.
Explanation of how select keys are used for system operation and selection.
Description of LED indicators for panel power and armed status.
Descriptions of various tones like Fire, Burglary, Key Press, Prewarn, Exit, and Monitor tones.
Explains messages like INVALID AREA, INVALID PROFILE, and FAILED TO EXIT.
Explains system configurations like Area, All/Perimeter, and Home/Sleep/Away for arming.
Details on arming all or selective areas, and bypassing zones.
Step-by-step guide for arming the area system.
Steps to disarm the system, including handling schedules and alarms.
How to disarm the system and handle false alarms during an active alarm event.
Silencing alarms and resetting smoke/glassbreak detectors.
Locking and unlocking doors, including emergency lockdown procedures.
Operating the door strike relay for access control.
Testing the system's battery, alarm bell, siren, and central station communication.
Testing panic zones to ensure they function correctly.
Testing the system's fire bells or horns.
Visual guide for navigating and checking zone status.
Visual guide for bypassing and resetting zones.
How the door strike relay activates and its relation to disarming.
Using access cards for arming and disarming area systems.
Commands for arming and disarming all or partial system areas via text message.
To Next Page