32
6.5.8 Email
If you need to trigger Email when an alarm happens or IP address is changed, please set the
Email here first.
Go to ConfigÆNetwork ÆEmail.
Sender Address: Sender’s e-mail address.
User name and password: Sender’s user name and password.
Server Address: The SMTP IP address or host name.
Select the secure connection type at the “Secure Connection” pull-down list according to
actual needs.
SMTP Port: The SMTP port.
Send Interval(S): Set it as needed.
Click “Test” button to test the effectiveness of the account.
Recipient Address: Receiver’s e-mail address.
6.5.9 FTP
After you set the FTP server, the captured pictures on an alarm will be uploaded to the FTP
server.
Go to ConfigÆNetwork ÆFTP.
To Next Page
Loading...