4ϳ
1 Relay Žutput - Select the ƌelay output.
The number of relay outputs depends on the camera model.
2 Mode - Select the monostable / bistable for relay mode.
3 Idle Ɛtate - Select whether the contact is normally opened or is closed.
4 Duration - Relay out is operated during the setting time.
If bistable mode is selected, this function is activĞ.
5 Click 'Apply' to make above setting effective.
^ĞƚƵƉͲdƌŝŐŐĞƌĂĐƚŝŽŶƐĞƚƵƉ
RelayoutĐonfiguration
1
2
3
4
5
To Next Page
Loading...