Digital Watchdog MEGApix DWC-MV85WiAT - Motion Detection Setup

ϱϬ
1 Motion Detection - tŚĞŶƚŚĞĐĂŵĞƌĂĚĞƚĞĐƚƐŵŽƚŝŽŶŝƚǁŝůůshowƚŚĞŵŽƚŝŽŶĚĞƚĞĐƚŝŽŶŝĐŽŶŝŶŽƌĂŶŐĞŽŶƚŚĞĐĂŵĞƌĂΖƐǀŝĞǁ.
Event Ălert ŝcon( ) appears if ‘ŵotion Ěetection’ is activated.
2 Area - Set the motion detected area.^ĞůĞĐƚĂŶĂƌĞĂĨƌŽŵƚŚĞĚƌŽƉͲĚŽǁŶůŝƐƚhƐŝŶŐƚŚĞŵŽƵƐĞĐůŝĐŬĂŶĚĚƌĂŐƚŽŵĂƌŬƚŚĞƐŝnjĞĂŶĚ
ƉŽƐŝƚŝŽŶŽĨƚŚĞŵŽƚŝŽŶĚĞƚĞĐƚŝŽŶnjŽŶĞzŽƵĐĂŶƐĞƚƵƉϰƐĞƉĂƌĂƚĞnjŽŶĞƐ
3 Activation - Enable or Ěisable motion detection function.
4
Sensitivity - ĞĮŶĞƚŚĞƐĞŶƐŝƚŝǀŝƚLJŽĨŵŽƚŝŽŶĚĞƚĞĐƚŝŽŶ
If Śigh is selected, ƚŚĞĐĂŵĞƌĂ will detect very small motion/ĨůŽǁŝƐƐĞůĞĐƚĞĚƚŚĞĐĂŵĞƌĂǁŝůůĚĞƚĞĐƚŽŶůLJůĂƌŐĞŵŽƚŝŽŶĞǀĞŶƚƐŝŶŝƚƐǀŝĞǁ
5
Click ‘Save’ to save the current settings.
Click 'Cancel' to return to the previous setting.
Setup - Event
ƐĞƚƵƉ
Motion Ěetection Đonfiguration
1
3
2
4
5