ϱϰ
1 Enabled - The ƌecording function can be enableĚ or disableĚ.
2 Storage Ěevice - ^hows ŝŶĨŽƌŵĂƚŝŽŶĨŽƌƚŚĞ SD CardŵŽƵŶƚĞĚŝŶƚŚĞĐĂŵĞƌĂ.
3 File ƚype - Select the recording file type.
CurrentlyƚŚĞĐĂŵĞƌĂƐƵƉƉŽƌƚƐ only MP4 ƚype.
4 Storage - Select the storage type. SD Card(Disabled) selection is not allowed.
5 ŽŶƚŝŶƵŽƵƐ - If ĐŽŶƚŝŶƵŽƵƐƌĞĐŽƌĚŝŶŐ mode is ĞŶĂďůĞĚ, ƚŚĞĐĂŵĞƌĂǁŝůůƐtart ƌecording without any ŽƚŚĞƌ settingƐŶĞĐĞƐƐĂƌLJ.
6 PreͲĚuration - Define duration of recording before an event.
7 PostͲĚuration - Define duration of image transfer after an event.
8 Click ‘Save’ to save the current settings.
Click 'Cancel' to return to the previous setting.
Setup - Record Ɛetup
Record ĐŽnfiguration
1
2
3
4
5
6
7
8