Digital Watchdog MEGApix DWC-MV85WiAT - IEEE 802.1 X Network Authentication

ϲϭ
The feature is needed when connecting the camera to Ă network protected by the IEEE 802.1X. 

1 IEEE 802.1x - The IEEE 802.1x feature can be enableĚ or disableĚ.
2
Protocol
- MD5: It provides one-way password-based network authentication of the client.
- PEAP: It is similar to TTLS in that it does not require a certificate on the client side.
- TTLS / MD5: It does not require a certificate on the client side.
- TLS: It relies on client-side and server-side certificates to perform authentication.
3 EAPOL ǀersion - Select the EAPOL Version.
4 ID - Type the ID to identify the client in the IEEE 802.1X authentication server.
5 Password - Type the Ɖassword to identify the client in the IEEE 802.1X authentication server.
6 Verify - Verify Ɖassword.
7 CA Đertificate - Select the CA certificate required for TLS, TTLS, and PEAP authentication.
8
Certificate - Select the client certificate required for TLS authentication
9
Click ‘Apply’ to make above setting effective.
Setup - Security Ɛetup
IEEE 802.1X Đonfiguration
1
2
3
4
5
6
7
8
9