[11]
The Camera Management menu allows you to search, register and manage your IP cameras, DVRs and
NVRs. See “3.2 Camera Registration” for more information.
The module will scan the network for all supported DVR/NVR. Select the devices you wish to register
from the search results and press the ‘GET INFO’ button.
‘DETAIL INFO’ allows you to get more information on the device’s streams.
Enter the user ID and password for the devices you are registering.
You can also select which channels to register.
Click ‘APPLY’ to register the device.
The module will scan the network for all supported IP cameras automatically. From the results, you can
drag cameras to the viewing channel to assign them to channels.
5. Click the START button to search the camera.
6. Select a camera and while clicking on the camera, drag it to a channel to assign it. If needed,
enter the user ID and password for the device you are registering.
7. Click the CLOSE button to finish the process.
To Next Page
Loading...