[13]
Recorder Connection through the Network
The module will scan the network for all supported DVR/NVR automatically. Select the DVR/NVR you
wish to register from the search results and press the ‘GET INFO’ button to obtain the device’s
streaming profile. ‘DETAIL INFO’ allows you to get more information on the device’s streams. If
necessary, enter the user ID and password for the device you are registering. You can also select which
channels from the DVR/NVR you wish to register. Click ‘APPLY’ to register the device.
Camera Connection through the Network
1. Click the START button to search the camera. The module will search the network for
cameras and display all results in the table on the right.
2. Select the camera in the list and drag and drop it to the channel you want to assign to the
camera. (While moving, the mouse pointer is changed to ).
3. Click the CLOSE button to save the registration.
If a user wants to connect to DVR/NVR in a different network, DVR/NVR can be added manually using
the ADD DVR/NVR MANUALLY button.
1. Click the SEARCH button to open the camera property window.
To Next Page
Loading...