[20]
Enter a site name to differentiate the module from other sites.
Using the available options, manually adjust the date and time, select the display mode for the time
and the date, and select the appropriate time zone. If applicable, check the ‘USE DST’ box.
There are four types of time sync modes:
• Server Mode: The operating module is set as a Time Sync Server, which can synchronize the
time to another module (s) connected over the same network.
• Client Mode: Input the IP address of a designated module or PC running Remote Software as
a Time Sync Server in “SYNC SERVER”. The module’s time clock will be synchronized with
the server by interval time set in “TIME SYNC CYCLE”.
• NTP Mode: “pool.ntp.org” is the recommended NTP Server. To activate, set the TIME ZONE of
your local area and then click the SYNC NOW button.
• GPS Mode: Connect USB type GPS device and click the SYNC NOW button.
To Next Page
Loading...