[21]
Select the display language from the available options.
View the module’s current firmware version and update it to a newer version via DVD/CD/USB
Memory Stick/FTP server.
Do not click CANCEL during firmware upgrade. It may cause serious damage.
Settings may be changed to factory default. It is recommended to check the settings and
operating conditions of the module after the firmware upgrade.
Upgrading system using USB memory stick:
1. Insert a USB drive with the firmware file formatted by FAT/FAT32 in any USB port of the module
(compatible with USB 2.0). The firmware file must be placed into the USB’s root directory. If the
firmware file is placed in a folder, it may not be recognized by the system.
2. Select ‘USB’ from the Method drop-down options and press the SCAN button.
3. Once the system detects the USB drive, it will display the firmware file under ‘CURRENT VER’ and
the ‘NEW VER’.
4. Click START to begin the upgrade process.
Upgrading system using Digital Watchdog’s Automatic Firmware Upgrade via FTP server:
1. Select FTP in the drop-down options under ‘Method’.
2. Enter the FTP’s address: ftp.dwcc.tv
and enter the username and password (these should be filled
out automatically). Username: vmaxipplus, password: vmaxipplus.
The FTP server address is subject to change without a prior notice
3. Enter a value for the Check Time. The system will automatically check the FTP server for newer
firmware every day at a set hour.
4. Click the OK button to proceed with an automatic firmware upgrade. Once the firmware update
is complete, the system will reboot.
5. Click the CHECK button to allow the module to connect to the FTP server and check the latest
Firmware version. If a new firmware is available, the module will ask you whether you want to
upgrade it or not.
6. Click the OK button to confirm and click the START button to start upgrading.
To Next Page
Loading...