[28]
your network for all supported devices. The first five characters of the file name of a detected
module represent the model number, followed by the module’s IP address
Once the PC discovered the module, double click on the icon to open the module’s web client.
Enter your User ID and Password to login and click ‘Connect’ to connect.
The maximum number of simultaneous connections is 15 users.
Maintenance
Check network status and setup Mac address filter, IP
address filter and HTTPS certificate.
Network Monitor
Check the network status of each camera and data flow
information for the module and cameras.
MAC Address Filter
This function allows or blocks a specific Mac address from a client such as 3C™ CMS or mobile.
When the user registers a specific Mac address to allow, only that address can access the module
by the client. Or when a user registers a specific Mac address to block, that address can’t access
the module by the client. This function works only on the local network and not work on web Login.
IP Address Filter
This function allows or blocks a specific IP address. When a user registers a specific IP address to
allow, only that address can access the module. Or when a user registers a specific IP address to
block, that address can’t access the module. This function is not working on web Login.
To Next Page
Loading...