Digital Watchdog Spot DW-HDSPOTMOD16 - 2 Startup Wizard; Language; Network

Spot™ Monitoring Module
[9]
2.
Startup Wizard
When the module is launched for the first time, the STARTUP WIZARD will appear. This wizard helps
you setup the module’s most basic settings for proper functioning. You can access the Startup Wizard
screen at any time by clicking the Startup Wizard button under the MENU>SYSTEM>SETTINGS menu.
(See “4.1.5 SETTINGS”). If “DISPLAY ON SYSTEM STARTUP” is selected, Startup Wizard will appear
every time the system reboots.
2.1
Language
Select the language from the available drop-down options. Click APPLY to save the changes and
NEXT to move to the next screen.
.
2.2
Network
Setup the module’s network settings for remote connection.
Network Type
DHCP: The module will acquire all the network settings automatically according to the current
network requirements. Click the ‘IP DETECT’ button to automatically fill out all the network settings.
Static IP: manually enter all the network settings. For proper configuration, it is recommended to
assign the module a DHCP address and let it auto-discover all the proper network settings, and
then change the Network Type back to Static IP and save the changes. Contact your Network