2. Startup Wizard
When the DVR is launched for the first time, the STARTUP WIZARD will appear. This wizard
helps you setup the DVR’s most basic settings for proper functioning. You can access the
Startup Wizard at any time by clicking the [ ] button for the Startup Wizard in MENU >
SYSTEM > SETTINGS. (See Section
4.1.5 Settings).
2.1 Language
Select the language according to the country or user’s preference.
If “Run Startup Wizard upon reboot” is selected, the Startup Wizard will appear every time the
system is started.
2.2 Network
Setup the DVR’s network settings for remote connection. You can select to manually configure
the DVR’s network settings (Manual Config.). You can also allow the system to setup the
network settings automatically by selecting AUTO CONN. (PathFinder™).
To Next Page
Loading...
