3. Operation
3.1 User Log-in
Input the USER and PASSWORD credentials to log in after turning on the system.
If a user forgets their password, they may click the icon to check the password hint.
1. The LOGIN window will be permanently displayed until a user logs in with the
right USER and Password.
2. If DVR is set as AUTO LOGIN, the login process is not necessary. See “Section
4.1.2 User” for more information.
The key in the virtual keyboard includes often-used words, such as “Admin, root,
http://, rtsp://, www., .com, .net, .org, etc.”.
3.2 Live Display Mode
3.2.1. Channel Selection
Live camera images from your cameras will display after powering ON the DVR. The images can
be seen in 1, 4, 6, 9, 10, 13 and 16 split-screen options (some split options may not be available
depending on the maximum number of channels of the DVR). Click the display mode button
( ) on the toolbar to change the display to the next layout or sequence. To
switch from a multi-channel view to a single camera, double-click on the selected channel. To
return to the multi-channel mode, click the left mouse button again.
A “VIDEO LOSS” message will display on the screen when no camera is connected or if a camera is
disconnected suddenly. When a camera is disconnected, a warning sound will emit, depending on the
system’s event alarm settings.
Admin users can set various levels of authorization for each user, with viewing access to specific
channels. If a certain user is not authorized to view a channel, the image will be unavailable within the
viewing screen and the DW logo will show instead of Live video as shown in the example below.
To Next Page
Loading...
