4.1 System
4.1.1. Information
Site Name
Enter a site name to differentiate the DVR from other sites/recorders.
Keyboard ID
Setup KEYBOARD ID to match the ID settings of a keyboard controller. The keyboard model
and BAUD RATE must be setup in MENU > DEVICE > KEYBOARD (See Section 4.2.6
Keyboard).
Date/Time
Using the available options, manually adjust the date and time, select the display mode for
the time and the date, and select the appropriate time zone. If applicable, check the “USE
DST” box.
There are three types of time sync modes:
• Server Mode: The operating DVR is set as a time sync server, which can synchronize
the time other DVR(s) are connected over the same network.
• Client Mode: Input the IP address of a designated DVR or PC running remote software
as a time sync server in “SYNC SERVER”. The DVR’s time clock will be synchronized
with the server by interval time set in the “TIME SYNC CYCLE”.
• NTP Client Mode: “pool.ntp.org” is the recommended NTP server. To activate, set the
TIME ZONE of your local area and then click [SYNC NOW].
To Next Page
Loading...
