4.2 Device
4.2.1. Camera
Set each camera’s title, covert channel settings, privacy masks and general camera adjustments.
LITE
In cases where a camera with 2560x1440 resolution or higher is in use, adjust the resolution
to increase the frame rate. (
*This function is only activated when the resolution is
2560x1440 or higher.)
Group REC.
You can assign each camera to a group (A, B, C, or D). Cameras in the same group will have
the same recording settings when an event occurs. For example, if CAM 1~4 are assigned to
Group A, and an event is detected on CAM 1, all cameras under Group A will record as if
they detected the event as well.
Title
Enter a name to distinguish each channel on your recorder.
Covert
Also known as a hidden camera, covert status hides the camera’s display in Live and
playback as if no camera was connected to the channel. Covert settings apply to both Live
and Playback views in both the DVR and remote software.
Adjust
Set the camera’s brightness, contrast, color, etc. Settings available under ADJUST depend
on the camera’s model and features. Click SET in the ADJUST section to get into the setup
screen.
• Adjust the applicable options using the drop-down menu options.
o Click DEFAULT to set the camera’s option as a default value.
o Click SET A or SET B to change the camera setup value quickly.
o APPLY ALL makes all channels have the same value.
o Click SAVE to save the changes.
o Click EXIT to exit the menu.
To Next Page
Loading...
