4.4.3. Recording Schedule
Set a recording schedule for each camera. Select the camera to set a schedule or ALL.
Recording can be set by each hour from 00 through 23 a day, for all days of the week. You can
also setup a special recording mode for holidays.
No Color (Off)
No recording. Even though recording frames are set in the CAMERA setup menu, the system
will not record anything if OFF Is set in the schedule table.
Yellow (Continuous Recording)
Record all the time as set in the CAMERA settings.
Green (Motion-Detection Recording)
The system records only when motion is detected.
If EVENT > MOTION ALARM is disabled, the system will record when motion is detected but
the motion alarm will not be activated.
Orange (Sensor-Activated Recording)
The system records only when a sensor is triggered as set in the EVNET > SENSOR menu.
If EVENT > SENSOR is disabled, the system will record when a sensor is triggered but the
sensor alarm will not be activated.
Sky blue (Continuous + Motion Detection Recording)
The system records continuously as set by the RECORD > CAMERA menu.
When motion is detected according to the settings in EVENT > MOTION ALARM, the DVR
will switch recording mode to motion configuration.
If EVENT > MOTION ALARM is disabled, the system will record when motion is detected but
the motion alarm will not be activated.
Brown (Continuous + Sensor-Activated Recording)
The system records continuously as set by the RECORD > CAMERA menu.
When a sensor is triggered according to the settings in EVNET > SENSOR, the DVR will
switch recording mode to motion configuration.
If EVENT > SENSOR is disabled, then the system will record when a sensor is triggered but
the sensor alarm will not be activated.
Pink (Motion Detection + Sensor-Activated Recording)
The system records only when motion is detected AND when a sensor is triggered at the
same time. If both EVNET > SENSOR and EVENT > MOTION ALARM are disabled, the
To Next Page
Loading...
