Digital Watchdog VMAX A1 G4 DW-VA1G44 - TCP;IP Port; Web Port

51 | VMAX A1 G4™ DVR
TCP/IP Port
Input the port number that is used for connecting mobile devices to the DVR (Default –
9010). If your ISP is blocking port 9010, please use a different, available port value (ex.
9020). Port forwarding with your ISP may be required for direct connections over the
Internet.
Web Port
Input the port number that is used for connecting with the DVR from a web browser
(Default – 80). If your ISP is blocking port 80, please use a different, available port value (ex.
8080). Port forwarding with your ISP may be required for direct connections over the
Internet.
RTSP Port
Input the port number that is used for connecting to RTSP. (Default – 554)
• Main Stream : rtsp://{IP ADDRESS}:{rtsp port}/main/ch{number}
• Sub Stream : rtsp://{IP ADDRESS}:{rtsp port}/sub/ch{number}
Bandwidth Limit
Depending on the setting made by the user, the system can control the data volume
transmitted over the network ranging from 25 kbps up to 1Gbps. This function is effective,
especially under narrow bandwidth network conditions or when the user wants to limit
“network bandwidth occupied by video transmission” to a certain level. The default is 100
Mbps.
UPnP (Universal Plug and Play) Port Forwarding
If in case of UPnP supported router, the DVR will port forward automatically after
communicating with the router without the need for complicated port forwarding setup at
router.
Once the PC discovered the DVR, double-click on the icon to open the DVR’s web client.
Enter your User ID and Password to log in and click “Connect” to connect.
NOTE
The maximum number of simultaneous connections is 10 users.
MAINTENANCE
Setup the Mac address filter, IP address filter and HTTPS certificate.