in Live or playback mode.
• TIME TABLE: Users can open the timetable and select footage for video playback.
• MODE: Users can change splitscreen display mode.
• PTZ: Users can control Pan/Tilt, Zoom In/Out, Focus In/Out and Preset buttons to
control PTZ cameras connected to the DVR.
• POP-UP MENU: Right-click to open additional options:
o Close all Channels: Close all viewing channels
o Close the selected channels: Close the selected
viewing channels.
o Go To Live / Playback: Change to Live or
Playback mode.
o Panoramic View: Change to screen mode to horizontal, vertical, or quad-screen
mode.
o Stream Type: Set the stream type. (Auto / 1
st
/ 2
nd
)
o S h ow Tex t : Set the information to display. (Channel title / Mode [Live/Playback]
/ Date / Time / Resolution)
6.3 Playback
To remotely playback video from the DVR, click Timetable or [Go to Playback] from the pop-up
menu.
• PLAYBACK TIME: Select the date and time from the timetable.
• Intelli-search bar: Move the red-vertical line to the time that the user wants to search.
The colors of the time bar indicate the different recording modes. Refer to “4.3.2” for
more information.
• Playback controls: Use the Fast Forward, Rewind and Play/ Pause buttons to control
the playback video.
6.4 Setup
Users can open new screen for web setup by clicking ‘Setup’ in the upper-right corner of the
screen. Recorder settings can be configured by the administrator with these menus.
To Next Page
Loading...
