【5】.F & Q
【5.1】Q: Why users can not control several appliances at
the same time?
A: First of all, use the original remote control to learn and
save code to your iphone, then, you should convert to the
operation interface of different devices accordingly.
【5.2】Q: Why Digitec Smart is not sensitive enough?
A: Digitec Smart transmit code through infra-red, which is
easily absorbed by walls or other obstacles. Try to make the
front end of remote control point straightly to the receiver
window, as well as not far from the appliance.
【6】. Attentions:
【6.1】Digitec Smart powered by iphone, Please make
sure there is enough power in your phone.
【6.2】Digitec Smart is not water-proof , please keep it dry,
avoid using in humid ,corrode or other harsh environments.
【6.3】Please make sure the controlled device is not too
close to other infrared devices in order to avoid error code.
【6.4】Digitec Smart does not belong to Children’s toy，
please keep it away from children to prevent them from eating
or other injures.
To Previous Page
Loading...