2
BOX CONTENTS
1 x Stereo Amplifer
1 x Remote
1 x User Manual
BEFORE FIRST USE
SPECIFICATIONS
Prior to using your product, please read all the safety and operating instructions
thoroughly. Please ensure you follow the steps below before using the product.
We recommend you keep the original packaging for storing the product when
not in use.
Find a safe and convenient place to keep this instruction manual for future
reference.
Unpack the product but keep all packaging materials until you have made sure
your new product is undamaged and in good working order. Ensure you have all
accessories listed in this manual.
Output Power: 120W +120WRMS Max (4 Ohms)*
Input Impendence: 47k Ohm
InputSensitivity: 300mV
Signal-to-Noise: ≥80dB
Total Harmonic Distortion(1KHz): ≤0.5%
Frequency Response: 20Hz-20KHz±2dB
Power Input: 240VAC @ 2A Max.
Audio Input: Dual Stereo RCA Sockets
Audio Output: 1 x Stereo RCA Sockets
Weight: 3.5kg
Dimensions: 250(W) x 240(D) x 90(H)mm
*The minimum allowable speaker impedance is 4 Ohms, which gives the maximum rated power of 120
Watts per channel. It will work perfectly well with higher impedance speakers such as 8 Ohms, it’s just
that the maximum power will be reduced. With 8 Ohms you will only get 60 Watts per channel, 6 Ohms
you would get about 80 Watts per channel and so on.
To Next Page
Loading...
