Comparing Changes
During the course of editing programs, you may find that you want to compare the edited version of the program to the original, stored
version. Fortunately, your 2120 VGS provides you with this valuable A/B feature in the Compare function.
To compare an edited Program with the original Stored version, do the following:
1. While in FX edit mode, press the <Edit> button once. The top line of the display reads:
When this message is displayed, the stored Program is temporarily loaded and active.
2. To return to the edited version, press the <Program> button to get to Program mode or the <Edit> button to get back to FX
Edit mode.
Storing/Naming Defaults
The Storing procedure allows you to rename, relocate and save any modifications you have made to Defaults so that they can be accessed easily
later in other programs.
1. When you have satisfactorily altered an Effect default (or created a new one), scroll back to Page 1 of the effect module you are
editing (if you’re not already there). The display will appear something like this:
2. From Page 1 of the FX edit menu, turn the <3> knob clockwise. You will then be able to name your new default.
To Next Page
Loading...
