DigiTech Hardwire SC-2 User Manual

5
8. Indicator LED - Lights when the effect is turned on. When battery
power is low (approximately 15 minutes before it dies), the Indicator
LED begins to dim giving you advanced warning that very shortly you
will need to replace the battery.
9. Foot Switch - Turns the effect on and off.
10. Output - Connect this output to the input of your amplifier or the
input of another pedal.
Note: Use unbalanced mono instrument cables only.

DigiTech Hardwire SC-2 Specifications

General

Brand	DigiTech
Model	Hardwire SC-2
Category	Music Pedal
Language	English