Device type for the GSP7
Device Type = 13 (0Dh)
DigiTech Procedures recognized by the GSP7
Request Configuration (00h)
Request One Program (01h)
Request Ram Area (06h)
Data Response (10h)
Reset Device (20h)
Reset Hardware (21h)
Reset Hardware Device (22h)
Receive Microcode (40h)
Receive Configuration (41h)
Receive One Program (42h)
Receive Ram Area (47h)
Continuous Controller Calculations
Parameter Value = (CC_Value * 2 * (PARAM_MAX + 1))/256
CC_VALUE The value of the continuous controller. (0-127)
PARAM_MAX The maximum value of the parameter the continuous controller is
changing.
Data format for the GSP7 Receive Configuration procedure
To Next Page
Loading...
