nn1 0vvvvvvvb where v is bits 6 - 0 of the transfer count.
nn2 0vvvvvvvb where v is bits 13 - 7 of the transfer count.
nn3 0vvvvvvvb where v is bits 20 - 14 of the transfer count.
d(c) 0000000vb where v is bit 7 of the cth byte being received.
d(c)' 0vvvvvvvb where v is bits 6 through 0 of the cth byte being sent.
The RECEIVE LARGE RAM AREA procedure is used to load an area of a DigiTech
device's internal ram from a host midi device. The Midi Device Manuals for
the DigiTech devices which support the RECEIVE RAM AREA procedure contain a
emory map and definition of the ram locations which may be received.
REQUEST BULK DUMP (01001001b 49h)
SYSX_HEADER 49h EOX
When a REQUEST BULK DUMP procedure is received, the DigiTech device will
respond with a RECEIVE LARGE RAM AREA procedure.
RETURN TO PROGRAM SCREEN (0110000 b 60h)
SYSX_HEADER 60h EOX
When a RETURN TO PROGRAM SCREEN procedure is received, the DigiTech device
ill return to the program screen if it is on an algorithm or parameter
screen.
To Next Page
Loading...
