1 - 49 Program definition
Total Number of Internal Ram Bytes Transmitted 49
Reset Hardware Area
The following hardware areas are defined for the GFX-1:
Reset Program
The program definition of the active GFX-1 program is based at ram address
450h. If any parameters are changed by the RECEIVE RAM AREA procedure, a
reset of the parameter should follow.
Major Minor Hardware Device
0 0 Reset minor devices 1-28
1 Reset Compression
2 Reset Compression Amt
3 Reset Compression Lvl
4 Reset Vacuum Tubes
5 Reset Tube Bias
6 Reset Tube Gain
7 Reset Tube Saturation
8 Reset Graphic Eq
9 Reset 63 Hz
10 Reset 160 Hz
11 Reset 400 Hz
12 Reset 1.0 kHz
13 Reset 2.5 kHz
14 Reset 6.3 kHz
15 Reset 16.0 kHz
To Next Page
Loading...
