Parameter Value = (CC_Value * 2 * (PARAM_MAX + 1))/256
CC_VALUE The value of the continuous controller. (0-127)
PARAM_MAX The maximum value of the parameter the continuous controller is
changing.
Data format for the DSP256 Receive Configuration procedure
Please note that each internal ram byte (d7 - d0) is transmitted as 2 midi
bytes. The first midi byte is 0000000xb where x is d7. The second midi byte
is 0xxxxxxxb where x is d6 - d0. Refer to the Receive Configuration
procedure in the General Midi Implementation Manual for required header
information.
Ram Byte Number Quick Definition
1 - 2048 128 Program names
2049 - 4864 128 Program definitions
4865 - 5458 27 Algorithm definitions
5459 Program number
5460 Midi receive channel
5461 - 5553 Global link table of parameters to continuous controllers
5554 - 5681 Translation table of received midi program number to
DSP256 program number
5682 Send program change flag
5683 Hand controller flag
5684 - 5700 Foot switch function table
5701 - 5717 Foot switch program table
5718 LCD contrast value
Total Number of Internal Ram Bytes Transmitted 5718
Data format for the DSP256 Receive One Program procedure
To Next Page
Loading...
