DigiTech Midi - Page 22

The next section defines program definition bytes 2-22 for each of the 27
algorithms of the DSP256. The first of each algorithm definition contains
the number of the algorithm and it's name. The algorithm number goes in
program definition byte 1. The remaining lines of the algorithm definition
follow this format:
PDB# Parameter Name min - max
PDB# The Program Definition Byte Number
m
in The minimum value to which this parameter may be set
m
ax The maximum value to which this parameter may be set
A
ll numbers are given in decimal.
A
full definition of each parameter may be found at the end of this
document.
A
lgorithm 0
MUTE
2 - 22 Not used, set to 0.
A
lgorithm 1
Dry
2 - 22 Not used, set to 0.