REQUEST RAM AREA (00000110b 06h)
SYSX_HEADER 06h bb ww xx yy zz nn EOX
bb Bank number of ram being requested. Currently the only valid bank in
DigiTech devices is 00h.
w 0000000vb where v is bit 15 of the ram address.
xx 0vvvvvvvb where v is bits 14 - 8 of the ram address.
yy 0000000vb where v is bit 7 of the ram address.
zz 0vvvvvvvb where v is bits 6 - 0 of the ram address.
nn 1 to 7Fh, the number of ram bytes to be sent.
The REQUEST RAM AREA procedure is used to have the DigiTech device send an
area of its internal ram to a host midi device. When a REQUEST RAM AREA
procedure is received, the DigiTech device will respond with a DATA RESPONSE
procedure. The Midi Device Manuals for the DigiTech devices which support
the REQUEST RAM AREA procedure contain a memory map and definition of the
ram locations which may be requested.
DATA RESPONSE (00010000b 10h)
SYSX_HEADER 10h bb ww xx yy zz nn d(1) d(1)'...d(nn) d(nn)' EOX
bb Bank number of ram being sent. Currently the only valid bank in DigiTech
devices is 00h.
w 0000000vb where v is bit 15 of the ram address.
xx 0vvvvvvvb where v is bits 14 - 8 of the ram address.
yy 0000000vb where v is bit 7 of the ram address.
zz 0vvvvvvvb where v is bits 6 - 0 of the ram address.
nn 1 to 7Fh, the number of ram bytes in this response.
To Next Page
Loading...
