Major operations under preferences are as follows:
1. LED on/off
You can choose from Aux LED Mode the LED status as Off/On/Auto
and click Apply. Click OK to continue.
2. Brightness
You can adjust the brightness best suitable for object observed.
3. Image Mirror and Image Flip option:
Image Mirror and Image Flip options are also available. Please ensure
that these options are deselected for correct image capture.
Capture
1. Photo capture
You can take photos by either of the following ways:
1) Click the camera button
2) Choose Capture and then click Photo
3) By pressing F11
12
To Next Page
Loading...