1: Safety precautions
Important: Do not expose this product to rain or moisture to preserve the life
of your product.
Caution: Do not disassemble this unit. To prevent the risk of electric shock, do
not remove cover.
Ventilation: The device should be situated so that its location or position
does not interfere with its proper ventilation. For example, the unit should not
be situated on a bed, sofa, rug or similar surface that may block the ventilation
op
enings.
Heat: The device should be situated away from sources of high heat
such as radiators or stoves.
Cleaning: We strongly suggest using a clean, dry, non-alcohol cotton swab
to clean the glass surface periodically to produce a clear image.
Non use period: The USB cord for the device should be unplugged from the
computer when the unit is left unused for a long period of time.
USB overloading: Do not overload the USB connections on your computer.
If you have too
many devices connected to your computer such as a wireless
mouse, media player, mobile phone or other USB powered devices. There
may not be enough power for the film & photo scanner to operate properly.
Servicing: The user should not attempt to service the device beyond those
means described in the operating instructions. All other servicing
should be referred to qualified person.
Film Holder: The design of the film holder follows ISO standard. In some
cases
the holes on the film will not match exactly to the alignment of the holder.
This is caused by a non-standard camera. In this case there will be a small
black line on the edge of the frame that can easily be cropped out using photo
editing software.
ISO-- International Organization for Standardization
For environmental protection and energy conservation, besides in PLAYBACK
and USB mode, the device will be powered off automatically without any
operation in 30 minutes
of inactivity.
2 - EN
To Next Page
Loading...
