© 2022 Digitrax, Inc. www.digitrax.com
6.0 Advanced DT602 based PM74 conguration
To perform these advanced features, a DT602 with SubVersion 0.5 or higher
will be needed - see www.digitrax.com for the latest software IPL.
6.1 Detecting all PM74's and setting Base addresses: On an updated
plugged into-
any
1.
2.
-
pancy detection number used.
3. detected
and sorted
3122 is not set at or above.
4.
encoder knob to scroll up and down
an underline showing the current select-
8.
seconds.
9.
11.
Cs Rt
Selecting DS7X device:
Device: Base+Out# SerNo
PM74 Sw0001+4 # 1222
PM74 Sw0001+4 # 3122
DS7x device select: LH knob
Chng adr
Ident