Installing the Hardware
1. When Windows has completely loaded, insert the USB type A plug of the camera to your USB 2.0 port.
2. The camera comes with 6 white lamps, 3 on each side of the lens to assist in
lighting the subject. These will light up if the subject or area is too dark.
3. Clamp the camera to your Notebook LCD panel or use the clamp as a stand to
upright the camera.
4. Once Windows detect the USB insertion, it will prompt for a driver source search.
5. The Wizard will then prompt for automatic
installation or specify a source location. Select the
first option “Install the software automatically”.
Click on “Next” button to proceed.
To Next Page
Loading...