4
System Requirements
• Windows 11/10/8.1/8/7, Windows Server
2008/2012, FreeBSD, Linux
• Available PCI Express x1slot
Hardware installation
1. Turn off the computer and unplug the power
cord
2. Remove the computer cover and the PCIe card
slot cover from the slot that matches your PCIe
card
3. Insert the PCIe card edge connector into the slot
and secure the bracket to the chassis
4. Replace the computer cover, then plug in the
power cord
5. Power on the computer
6. Connect the RJ-45 network cable
To Next Page
Loading...