Digitus DN-95210 User Manual

PoE Tester
Manual
DN-95210
Use this PoE tester to determine if a network cable or port is providing
Power-Over-Ethernet. When you plug a network cable into the tester (or
connect the tester to a network jack), an LED will light up if active 24-48V
PoE is detected. The tester will also indicate if the PoE is active on the
Endspan (1-2/3-6) or Midspan (4-5/7-8) pairs.

Digitus DN-95210 Specifications

General

Brand	Digitus
Model	DN-95210
Category	Test Equipment
Language	English