Digitus DS-30000-1 User Guide

Hardware Installation
1. Turn off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus connector with
the selected PCIe slot on the motherboard. Push the board
down firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Driver Installation
Different systems please select its corresponding driver files
1. Insert the Driver CD into the CD-ROM drive.
2. At the Found New Hardware Wizard, Select Locate
DS-30000-1\DS-30000-1_CD\Driver
3. Press “Install” button to install the drivers.
4. Click “Exit” button to complete the driver installation.
5. Restart the PC.
6. Once the system gets booted the Windows will automatically
matching the device driver

Digitus DS-30000-1 Specifications

General

Brand	Digitus
Model	DS-30000-1
Category	PCI Card
Language	English