4.0 Package Contents
1 x 7.1 Channel PCI Sound Card
1 x Driver CD with User manual
5.0 Hardware installation
It is recommended that you remove any previously installed sound card and drivers prior
to installing this 7.1 Channel PCI Sound Card to avoid any conflicts. If previously installed
drivers are not removed, this 7.1 Channel PCI Sound Card perhaps not function properly.
(Note: If your computer has on-board sound you will need to disable it on the motherboard.
For more information please see your computer’s documentation or contact your
computer’s manufacturer.)
Otherwise, before installing the device, please ensure turning off your computer and
unplug the power cord to prevent damage to the devices and the system components.
To install the sound card .please follow the steps below:
1. Disconnect your computer from the power source
2. Open the computer case
3. Locate an available PCI slot on your computer, and insert this 7.1Channel PCI Sound
Card into the slot.
4. Fasten the card to the case using a screw
5. Close the computer case; plug the peripherals into the corresponding jack of the sound
card (according to the picture below):
A: MIC In Connect your microphone here
To Next Page
Loading...