Digoo BB-M1 - Connection Methods; Quick AP Configuration

(î) PTZ control (2) image capture (S) image inversion ® voice intercom
(B) voice switch (B) ciarity
Second way: Quick AP Configuration (Iphone does not support this
feature) (Figure 5/6)
1. Long Press " reset button (the reset button in the bottom of caméra
with a small hole, put a toothpickto press)" There will be a voice
prompt "restore factory settings successfully" and then enter "WIFI
Smart l ink "mode (voice prompts), enter router password, the device in
the case of LAN device configuration
31064373
» Settlngs-
Network ^ AP mode(hotspot mode without Connecting a router) to
save the tick, the voiceprompts will build a successfui hot spot)
return my device (the device will display Internet Online), long press
device name "Delete Device" ,Click AP Quick Configuration -» Click
Searched the device name can be connected (if the device did not
corne out, pis refresh):
( Figures )
( Figureô )