Digoo BB-M1 - Hot Configuration Methods; AP Hot Spots Mode Setup

2. Selectthe router, enter the router password, click "Save", and after
devices connected to the router, the device will appear in the device
list. (Figure 7/8)
( Figure? )
n -AP TO -Je (tiollpot mode, no easrnsi roulmg)
( Figures )
® (g) ©
® ® #
Three ways: hot configuration (support for Apple and Android phones)
Short press (Reset key In a small hole in the bottom of caméra, put a
toothpick to ciick) "reset button" to enter "AP hot spots" mode
1. open the phone WIFI settings, connected devices hot spot(MV
beginning hotspots) :(Figure9)
2.in the APP, click on the "Search Device" (Figure 10)