Scan the QR code and download and install the free
Android or IOS app.
Download the Smart Life App2
Power the WiFi Hub & Thermo-Hygrometer
1
Step 1: Plug the Wi-Fi Hub into an indoor outlet.
Step 2: Pull out the insulating piece to power up the
thermo-hygrometer.
Note: (The distance between the Wi-Fi Hub and the
thermo-hygrometer should not exceed 49.2/15m).
Please do not place the sensors where your
Bluetooth signal will be obstructed.
4
lnitial Smart Life App Setup
Step 1: Turn on the phone's bluetooth and WiFi.
Step 2: Long-press the button on the WiFi hub for
5-10s until the green lights flash to keep in pairing
mode.
Step 3: Click "Add device" or top right "+", select "
Gateway control">"Socket Gateway (BLE)"> to add
the WiFi Hub in app.
Step 4: Waiting for connecting to be 100% completed.
01 02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50 51 52 53
54 55 56 57 58 59 60 61 62 63 64 65 66
To Next Page
Loading...
Need help?
General
