Amazon Alexa and Google Assistant
Sensors with wifi hub can be used with Alexa and
Google Assistant. You can find the instructions
via the below steps:
1. Click the "Me" --- "Alexa icon and Google
Assistant" --- "View more ways to link" ---
"Instructions", same way as Google Assistant.
a. If you works with Google Assistant, please
follow with the below command.
①OK Google, what humidity does <device name>
show?
②OK Google, what is the<device name>
temperature?
③Ok Google, what percentage charge does my
<device> have
Connection Method
Step1: Aer the gateway getting connected, then add
a sensor to the APP.
Step2: Long-press sensor the "Network Switch" for
5-10s until the green lights flash to keep the
thermo-hygrometerin pairing mode.
Step3: Click upper right corner "+", select "Sensors" >
"Sensor(BLE) to add the thermo-hygrometer.
Step4: Click the Gateway icon, tap "Add device" and
select >"Add existing" >" add the already connected
thermo-hygrometer in Gateway.
Note: Make sure Bluetooth and WiFi on your phone is
turned on during paring. Please check the above
steps and try again if paring fails.
5
Hinweis: Stellen Sie sicher, dass Bluetooth und
WLAN auf Ihrem Telefon während des Pairings
eingeschaltet sind. Bitte überprüfen Sie die obigen
Schritte und versuchen Sie es erneut, wenn das
Pairing fehlschlägt.
01 02 03 04 05 06 07 08 09 10 11 12 13 14
15 16 17 18 19 20 21 22 23 24 25 26 27
28 29 30 31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50 51 52 53
54 55 56 57 58 59 60 61 62 63 64 65 66
To Next Page
Loading...
Need help?
General
