12
9, Press the UP or DOWN arrow
to display one of the following
options:
FAIL The buzzer will output a
constant tone along with
the red (FAIL) LED.
PASS The buzzer will output a
constant tone along with
the green (PASS) LED.
PULSE The buzzer will output a
short beep whenever an
alarm band point is
crossed from either
direction.
Press the MORE key
when your choice is
displayed. . . The display shows the
first alarm point.
10. You can review all
your choices by
pressing the MORE
key repeatedly or
enter another mode
or return to the main
display mode.
11. Press the MODE key
twice to return to the
main display mode or
press the MODE key
then COM key to
enter the
communications mode
explained in the next
section.
Audio Only
Options
To Next Page
Loading...
Need help?
General
