14
UNItS The value is transmitted
as a numeric string with
the current display units
appended.
16bit The value is transmitted
as a 2s complement 16
bit calibrated unscaled
binary number. This is a
special output for
advanced software
applications.
When the format you
want is displayed,
press the MORE
key. . . The format is entered
into memory and the
current setting of the
termination character
parameter is displayed.
3. Press the UP or DOWN arrow
keys to display one of the following
options for the termination
character:
NULL No characters are
transmitted at the end of
a reading.
Cr A carriage return
character is transmitted
after each reading.
LF A line feed character is
transmitted after each
reading.
Certain printers need
to receive a carriage
return (Cr) or line
feed (LF) character
or both in order to
print the required
results successfully.
Check the operations
manual for your
printer or other
peripheral in order to
ascertain what is
required. This setting
only applies to the
RS-232 port.
Termination
Characters
To Next Page
Loading...
Need help?
General
